|
Specifications| General |
|---|
Frequency
range IC-F3061T/S IC-F4061T/S
|
136–175MHz 400-470MHz 450-520MHz | | Number of channels | 512 channels/128 zones | | Channel spacing | 12.5kHz/25kHz, 15kHz/30kHz, 6.25kHz (option) | | PLL channel step | 2.5kHz,
3.125kHz | | Antenna impedance | 50Ω | | Usable
temperature range | –30°C to +60°C; –22°F to +140°F | | Power
supply requirement | 7.2V DC | Current drain (at 7.2V DC) Transmit
Receive |
| VHF/UHF | 1.5A/1.8A (at 5W/5W) | | stand-by | 95mA | | rated output | 600mA
|
| Dimensions (with BP-232)
(projections are not included) | 53 (W) ×136 (H) ×38.5 (D) mm;
23⁄32 (W) ×511⁄32
(H)×117⁄32 (D) in | | Weight (approx.) | 338g;
11.9oz (with BP-232N) |
| Transmitter |
|---|
| Output
power | 5W (VHF), 5W (UHF) | | Max. frequency deviation | ±5kHz
(Wide) ±2.5kHz (Narrow) | | Frequency error | ±1.0 ppm | | Spurious emissions | 75dB typ. | | Adjacent channel power | 80dB typ. (Wide), 70dB typ. (Narrow) | | FM Hum and Noise | 46dB
typ. (Wide)
40dB typ. (Narrow) | | Audio harmonic distortion | 3% typ. (AF
1kHz, 40% deviation) | | Modulation limiting | 60–100% of max. deviation | | External microphone connector | 9-pin multi connector/ 2.2kΩ |
| Receiver |
|---|
Intermediate frequency 1st 2nd |
46.35MHz 450kHz | | Sensitivity | 0.25μV typ. (at 12dB SINAD) | | Squelch sensitivity | 0.25μV
typ. (at threshold) | | Adjacent channel selectivity | 75dB typ. (Wide)
68dB
typ. (Narrow) | | Spurious response | 70dB min. | | Intermodulation | 74dB typ. | | Hum and noise ratio | 46dB typ. (Wide)
40dB typ.
(Narrow) | | Audio output power | 500mW typ. (at 5% distortion with an 8Ω
load) | | External speaker connector | 9-pin multi connector / 8Ω |
Measurements
made in accordance with EIA-152C/204D, TIA-603. All
stated specifications are subject to change without notice or obligation. Applicable
U.S. Military Specifications Icom makes rugged products that have been tested to and pased the following MIL-STD requirements
and strict environmental standards. Standard | MIL 810C | MIL
810D | MIL 810E | MIL 810F | | Method | Proc. | Method | Proc. | Method | Proc. | Method | Proc. | | Low Pressure | 500.1 | I | 500.2 | I, II | 500.3 | I, II | 500.4 | I, II | | High Temp. | 501.1 | I | 501.2 | I, II | 501.3 | I ,II | 501.4 | I, II | | Low Temp. | 502.1 | I | 502.2 | I,
II | 502.3 | I, II | 502.4-3 | I, II | | Temp. Shock | 503.1 | I | 503.2 | I | 503.3 | I | 503.4 | I | | Solar Radiation | 505.1 | I | 505.2 | I | 505.3 | I | 505.4 | I | | Rain | 506.1 | II | 506.2 | II | 506.3 | II | 506.4 | III | | Humidity | 507.1 | I, II | 507.2 | II, III | 507.3 | II, III | 507.4 | — | | Salt Fog | 509.1 | I | 509.2 | I | 509.3 | I | 509.4 | — | | Dust | 510.1 | I | 510.2 | I | 510.3 | I | 510.4 | I | | Vibration | 514.2 | VII, X | 514.3 | I | 514.4 | I | 514.4 | I | | Shock | 516.2 | I, II, IV | 516.3 | I, IV | 516.4 | I, IV | 516.5 | I, IV |
Supplied accessories* - VHF Antenna
- UHF Antenna
- Battery pack, BP-232N
- Belt
clip, MB-94
*May differ according to version
|
