|
Specifications| General |
|---|
Frequency coverage
Transmit
Recieve |
144 - 148 MHz
136 - 174 MHz*
*Guaranteed 144 - 148
MHz only
Frequency ranges are depending on version
| | Mode | FM (F3E, F2D) | | No.
of memory channels | 207 (including 6 scan edges, and 1 call channel) | | Operating temperature range | -10°C
to +60°C; +14°F to +140°F | | Frequency stability | ±10 ppm (-10°C to +60°C) | | Power
supply requirement | 13.8 V DC ±15% (negative ground) | | Current drain | | Tx | High (at 75W) | 15A | | Rx | Max.
audio | 1.0A | | | Standby | 0.3A
typical (Fan-OFF) |
| | Antenna connector | SO-239 (50Ω) | Dimensions
(projections not included) | 150(W) × 50(H) × 150(D) mm;
529/32(W)
× 131/32(H) × 529/32(D) in | | Weight | 1.09 kg;
2.2 lb |
| Transmitter |
|---|
Output
power
(continuously adjustable) | 75, 25, 10, 5 W selectable | Maximum frequency deviation
(wide/narrow) | ±5.0/±2.5kHz | | Spurious emission | Less than -60
dB | | Microphone connector | 8-pin modular (600Ω) |
| Receiver |
|---|
| Receive system | Double-conversion superheterodyne system | Intermediate
frequencies
1st
2nd |
21.7 MHz
450
kHz | | Receive Sensitivity | 0.15 µV (at 12dB SINAD) | | Selectivity (wide/narrow) | More than 6/3kHz at -6dB
Less than 14/9 kHz at -60 dB | | Spurious and image rejection ratio | 75dB typical | | Intermodulation
rejection | 75dB typical | Audio output power
(at 13.8 V DC) | More
than 2.0W at 10% distortion with an 8Ω load | | Ext SP connector | 3-connector 3.5 (d) mm (1/8")/8Ω |
All
stated specifications are subject to change without notice or obligation. Supplied accessories - Hand
microphone*
- DC power cable
- Spare fuse
- Mobile mounting bracket
kit
- Microphone hanger*
*Depending on version.
|
