|
Specifications| General |
|---|
| Frequency coverage | 136-174MHz
400-470MHz, 450-520MHz | | Number of channels | Max. 32 channels | | Channel spacing | 6.25/12.5/25kHz
7.5/15.0/30kHz | | PLL channel step | 2.5,
3.125kHz | | Frequency stability | ±0.5ppm | | Operating temperature
range | -30°C to +60°C
-22°F to +140°F | | Power supply
voltage | 13.6V DC | Current drain (at 13.6 V DC)
Tx
Rx |
50W
Max. audio
Stand-by
|
15A
1.9A
500mA
400mA (FAN, LCD backlight off)
|
| | Antenna impedance | 50Ω (Type-N × 2) | | Dimensions
(W×H×D) | 483 × 88 × 260 mm
191⁄32 × 315⁄32
× 101⁄4 in | | Weight | 5.6 kg; 12.3lb (approx.) |
| Transmitter |
|---|
| Output power | 50W (adjustable
to 5W)
25W at 100% duty cycle | | Max. frequency deviation | ±5.0kHz/±2.5kHz
(wide/narrow) | | Spurious emissions | 80dB typ. | | Adjacent
channel power | 73/67dB typ. (wide/narrow) | | FM Hum and noise | 50/45dB
typ. (wide/narrow) | | Audio harmonic distortion | 1% typ. (40% deviation)
| | Microphone impedance | 600Ω (8-pin modular) |
| Receiver |
|---|
Sensitivity
FM (W/N)
Digital |
0.30µV typ. (at 12dB SINAD)
0.25µV typ. (at 5% BER)
| | Spurious response | 90dB | | Intermodulation
rejection ratio | 78dB | | Hum and noise ratio | 50/45dB
(wide/narrow) | | Audio output power | 4.0 W typ. at 5% distortion with a 4
ohm load | | External speaker connector | 2-conductor 3.5 (d) mm (1⁄8″)/4Ω
|
Applicable U.S. Military SpecificationsIcom makes rugged products that have been tested
to and pased the following MIL-STD requirements and strict environmental standards. | Standard | MIL 810F
| | Method | Proc.
| | High Temperature | 501.4 | I,
II | | Low Temperature | 502.4-3 | I,
II | | Dust | 510.4 | I | | Vibration | 514.4 | I | | Shock
| 516.5 | I |
Also meets equivalent
MIL-STD-810-C, -D and -E. Measurements made in accordance with TIA-603 (for Analog FM). All stated specifications
are subject to change without notice or obligation. Supplied Accessories- DC power cable
- Handle
kits
- Key assign stickers
|
